CVE-2017-17304

The CIDAM Protocol on some Huawei Products has multiple input validation vulnerabilities due to insufficient validation of specific messages when the protocol is implemented. An authenticated remote attacker could send a malicious message to a target system. Successful exploit could allow the attacker to tamper with business and make the system abnormal. Affected Huawei Products are: DP300 versions V500R002C00, V500R002C00B010, V500R002C00B011, V500R002C00B012, V500R002C00B013, V500R002C00B014, V500R002C00B017, V500R002C00B018, V500R002C00SPC100, V500R002C00SPC200, V500R002C00SPC300, V500R002C00SPC400, V500R002C00SPC500, V500R002C00SPC600, V500R002C00SPC800, V500R002C00SPC900, V500R002C00SPCa00; RP200 versions V500R002C00SPC200, V600R006C00, V600R006C00SPC200, V600R006C00SPC300, V600R006C00SPC400, V600R006C00SPC500; TE30 versions V100R001C10SPC300, V100R001C10SPC500, V100R001C10SPC600, V100R001C10SPC700B010, V500R002C00SPC200, V500R002C00SPC500, V500R002C00SPC600, V500R002C00SPC700, V500R002C00SPC900, V500R002C00SPCb00, V600R006C00, V600R006C00SPC200, V600R006C00SPC300, V600R006C00SPC400, V600R006C00SPC500; TE40 versions V500R002C00SPC600, V500R002C00SPC700, V500R002C00SPC900, V500R002C00SPCb00, V600R006C00, V600R006C00SPC200, V600R006C00SPC300, V600R006C00SPC400, V600R006C00SPC500; TE50 versions V500R002C00SPC600, V500R002C00SPC700, V500R002C00SPCb00, V600R006C00, V600R006C00SPC200, V600R006C00SPC300, V600R006C00SPC400, V600R006C00SPC500; TE60 versions V100R001C10, V100R001C10B001, V100R001C10B002, V100R001C10B010, V100R001C10B011, V100R001C10B012, V100R001C10B013, V100R001C10B014, V100R001C10B016, V100R001C10B017, V100R001C10B018, V100R001C10B019, V100R001C10SPC400, V100R001C10SPC500, V100R001C10SPC600, V100R001C10SPC700, V100R001C10SPC800B011, V100R001C10SPC900, V500R002C00, V500R002C00B010, V500R002C00B011, V500R002C00SPC100, V500R002C00SPC200, V500R002C00SPC300, V500R002C00SPC600, V500R002C00SPC700, V500R002C00SPC800, V500R002C00SPC900, V500R002C00SPCa00, V500R002C00SPCb00, V500R002C00SPCd00, V500R002C00SPCe00, V600R006C00, V600R006C00SPC100, V600R006C00SPC200, V600R006C00SPC300, V600R006C00SPC400, V600R006C00SPC500; eSpace U1981 version V200R003C20SPC900.

Weakness

The product receives input or data, but it does not validate or incorrectly validates that the input has the properties that are required to process the data safely and correctly.

Affected Software

Name	Vendor	Start Version	End Version
Dp300_firmware	Huawei	v500r002c00 (including)	v500r002c00 (including)
Dp300_firmware	Huawei	v500r002c00b010 (including)	v500r002c00b010 (including)
Dp300_firmware	Huawei	v500r002c00b011 (including)	v500r002c00b011 (including)
Dp300_firmware	Huawei	v500r002c00b012 (including)	v500r002c00b012 (including)
Dp300_firmware	Huawei	v500r002c00b013 (including)	v500r002c00b013 (including)
Dp300_firmware	Huawei	v500r002c00b014 (including)	v500r002c00b014 (including)
Dp300_firmware	Huawei	v500r002c00b017 (including)	v500r002c00b017 (including)
Dp300_firmware	Huawei	v500r002c00b018 (including)	v500r002c00b018 (including)
Dp300_firmware	Huawei	v500r002c00spc100 (including)	v500r002c00spc100 (including)
Dp300_firmware	Huawei	v500r002c00spc200 (including)	v500r002c00spc200 (including)
Dp300_firmware	Huawei	v500r002c00spc300 (including)	v500r002c00spc300 (including)
Dp300_firmware	Huawei	v500r002c00spc400 (including)	v500r002c00spc400 (including)
Dp300_firmware	Huawei	v500r002c00spc500 (including)	v500r002c00spc500 (including)
Dp300_firmware	Huawei	v500r002c00spc600 (including)	v500r002c00spc600 (including)
Dp300_firmware	Huawei	v500r002c00spc800 (including)	v500r002c00spc800 (including)
Dp300_firmware	Huawei	v500r002c00spc900 (including)	v500r002c00spc900 (including)
Dp300_firmware	Huawei	v500r002c00spca00 (including)	v500r002c00spca00 (including)

Extended Description

Input validation is a frequently-used technique for checking potentially dangerous inputs in order to ensure that the inputs are safe for processing within the code, or when communicating with other components. When software does not validate input properly, an attacker is able to craft the input in a form that is not expected by the rest of the application. This will lead to parts of the system receiving unintended input, which may result in altered control flow, arbitrary control of a resource, or arbitrary code execution. Input validation is not the only technique for processing input, however. Other techniques attempt to transform potentially-dangerous input into something safe, such as filtering (CWE-790) - which attempts to remove dangerous inputs - or encoding/escaping (CWE-116), which attempts to ensure that the input is not misinterpreted when it is included in output to another component. Other techniques exist as well (see CWE-138 for more examples.) Input validation can be applied to:

Data can be simple or structured. Structured data can be composed of many nested layers, composed of combinations of metadata and raw data, with other simple or structured data. Many properties of raw data or metadata may need to be validated upon entry into the code, such as:

Implied or derived properties of data must often be calculated or inferred by the code itself. Errors in deriving properties may be considered a contributing factor to improper input validation.

Note that “input validation” has very different meanings to different people, or within different classification schemes. Caution must be used when referencing this CWE entry or mapping to it. For example, some weaknesses might involve inadvertently giving control to an attacker over an input when they should not be able to provide an input at all, but sometimes this is referred to as input validation. Finally, it is important to emphasize that the distinctions between input validation and output escaping are often blurred, and developers must be careful to understand the difference, including how input validation is not always sufficient to prevent vulnerabilities, especially when less stringent data types must be supported, such as free-form text. Consider a SQL injection scenario in which a person’s last name is inserted into a query. The name “O’Reilly” would likely pass the validation step since it is a common last name in the English language. However, this valid name cannot be directly inserted into the database because it contains the “’” apostrophe character, which would need to be escaped or otherwise transformed. In this case, removing the apostrophe might reduce the risk of SQL injection, but it would produce incorrect behavior because the wrong name would be recorded.

Potential Mitigations

Assume all input is malicious. Use an “accept known good” input validation strategy, i.e., use a list of acceptable inputs that strictly conform to specifications. Reject any input that does not strictly conform to specifications, or transform it into something that does.
When performing input validation, consider all potentially relevant properties, including length, type of input, the full range of acceptable values, missing or extra inputs, syntax, consistency across related fields, and conformance to business rules. As an example of business rule logic, “boat” may be syntactically valid because it only contains alphanumeric characters, but it is not valid if the input is only expected to contain colors such as “red” or “blue.”
Do not rely exclusively on looking for malicious or malformed inputs. This is likely to miss at least one undesirable input, especially if the code’s environment changes. This can give attackers enough room to bypass the intended validation. However, denylists can be useful for detecting potential attacks or determining which inputs are so malformed that they should be rejected outright.
For any security checks that are performed on the client side, ensure that these checks are duplicated on the server side, in order to avoid CWE-602. Attackers can bypass the client-side checks by modifying values after the checks have been performed, or by changing the client to remove the client-side checks entirely. Then, these modified values would be submitted to the server.
Even though client-side checks provide minimal benefits with respect to server-side security, they are still useful. First, they can support intrusion detection. If the server receives input that should have been rejected by the client, then it may be an indication of an attack. Second, client-side error-checking can provide helpful feedback to the user about the expectations for valid input. Third, there may be a reduction in server-side processing time for accidental input errors, although this is typically a small savings.
Inputs should be decoded and canonicalized to the application’s current internal representation before being validated (CWE-180, CWE-181). Make sure that your application does not inadvertently decode the same input twice (CWE-174). Such errors could be used to bypass allowlist schemes by introducing dangerous inputs after they have been checked. Use libraries such as the OWASP ESAPI Canonicalization control.
Consider performing repeated canonicalization until your input does not change any more. This will avoid double-decoding and similar scenarios, but it might inadvertently modify inputs that are allowed to contain properly-encoded dangerous content.

References

https://www.huawei.com/en/psirt/security-advisories/huawei-sa-20171220-02-cidam-en

NVD	https://nvd.nist.gov/vuln/detail/CVE-2017-17304
CWE	https://cwe.mitre.org/data/definitions/20.html

Improper Input Validation

Weakness

Affected Software

Extended Description

Potential Mitigations

Related Attack Patterns

References