MACsec feature on Juniper Networks Junos OS 15.1X49 prior to 15.1X49-D100 on SRX300 series does not report errors when a secure link can not be established. It falls back to an unencrypted link. This can happen when MACsec is configured on ports that are not capable of MACsec or when a secure link can not be established. This can mislead customers into believing that a link is secure. On SRX 300 series devices, prior to 15.1X49-D100, MACsec was only supported on control and fabric ports of SRX340 and SRX345 devices. SRX300 and and SRX320 did not have any MACsec capable ports. Configuring MACsec on ports that were not MACsec capable would have resulted in this issue. Affected releases are Juniper Networks Junos OS 15.1X49 prior to 15.1X49-D100 on SRX300 series.
| Name | Vendor | Start Version | End Version |
|---|---|---|---|
| Junos | Juniper | 15.1x49-d10 (including) | 15.1x49-d10 (including) |
| Junos | Juniper | 15.1x49-d20 (including) | 15.1x49-d20 (including) |
| Junos | Juniper | 15.1x49-d30 (including) | 15.1x49-d30 (including) |
| Junos | Juniper | 15.1x49-d35 (including) | 15.1x49-d35 (including) |
| Junos | Juniper | 15.1x49-d40 (including) | 15.1x49-d40 (including) |
| Junos | Juniper | 15.1x49-d45 (including) | 15.1x49-d45 (including) |
| Junos | Juniper | 15.1x49-d50 (including) | 15.1x49-d50 (including) |
| Junos | Juniper | 15.1x49-d55 (including) | 15.1x49-d55 (including) |
| Junos | Juniper | 15.1x49-d60 (including) | 15.1x49-d60 (including) |
| Junos | Juniper | 15.1x49-d65 (including) | 15.1x49-d65 (including) |
| Junos | Juniper | 15.1x49-d70 (including) | 15.1x49-d70 (including) |
| Junos | Juniper | 15.1x49-d75 (including) | 15.1x49-d75 (including) |
| Junos | Juniper | 15.1x49-d80 (including) | 15.1x49-d80 (including) |
| Junos | Juniper | 15.1x49-d90 (including) | 15.1x49-d90 (including) |