In the Linux kernel, the following vulnerability has been resolved:
wifi: ath12k: fix use-after-free in ath12k_dp_cc_cleanup()
During ath12k module removal, in ath12k_core_deinit(), ath12k_mac_destroy() un-registers ah->hw from mac80211 and frees the ah->hw as well as all the ars in it. After this ath12k_core_soc_destroy()-> ath12k_dp_free()-> ath12k_dp_cc_cleanup() tries to access one of the freed ars from pending skb.
This is because during mac destroy, driver failed to flush few data packets, which were accessed later in ath12k_dp_cc_cleanup() and freed, but using ar from the packet led to this use-after-free.
BUG: KASAN: use-after-free in ath12k_dp_cc_cleanup.part.0+0x5e2/0xd40 [ath12k] Write of size 4 at addr ffff888150bd3514 by task modprobe/8926 CPU: 0 UID: 0 PID: 8926 Comm: modprobe Not tainted 6.11.0-rc2-wt-ath+ #1746 Hardware name: Intel(R) Client Systems NUC8i7HVK/NUC8i7HVB, BIOS HNKBLi70.86A.0067.2021.0528.1339 05/28/2021
Call Trace: dump_stack_lvl+0x7d/0xe0 print_address_description.constprop.0+0x33/0x3a0 print_report+0xb5/0x260 ? kasan_addr_to_slab+0x24/0x80 kasan_report+0xd8/0x110 ? ath12k_dp_cc_cleanup.part.0+0x5e2/0xd40 [ath12k] ? ath12k_dp_cc_cleanup.part.0+0x5e2/0xd40 [ath12k] kasan_check_range+0xf3/0x1a0 __kasan_check_write+0x14/0x20 ath12k_dp_cc_cleanup.part.0+0x5e2/0xd40 [ath12k] ath12k_dp_free+0x178/0x420 [ath12k] ath12k_core_stop+0x176/0x200 [ath12k] ath12k_core_deinit+0x13f/0x210 [ath12k] ath12k_pci_remove+0xad/0x1c0 [ath12k] pci_device_remove+0x9b/0x1b0 device_remove+0xbf/0x150 device_release_driver_internal+0x3c3/0x580 ? __kasan_check_read+0x11/0x20 driver_detach+0xc4/0x190 bus_remove_driver+0x130/0x2a0 driver_unregister+0x68/0x90 pci_unregister_driver+0x24/0x240 ? find_module_all+0x13e/0x1e0 ath12k_pci_exit+0x10/0x20 [ath12k] __do_sys_delete_module+0x32c/0x580 ? module_flags+0x2f0/0x2f0 ? kmem_cache_free+0xf0/0x410 ? __fput+0x56f/0xab0 ? __fput+0x56f/0xab0 ? debug_smp_processor_id+0x17/0x20 __x64_sys_delete_module+0x4f/0x70 x64_sys_call+0x522/0x9f0 do_syscall_64+0x64/0x130 entry_SYSCALL_64_after_hwframe+0x4b/0x53 RIP: 0033:0x7f8182c6ac8b
Commit 24de1b7b231c (wifi: ath12k: fix flush failure in recovery scenarios) added the change to decrement the pending packets count in case of recovery which make sense as ah->hw as well all ars in it are intact during recovery, but during core deinit there is no use in decrementing packets count or waking up the empty waitq as the module is going to be removed also ars from pending skbs cant be used and the packets should just be released back.
To fix this, avoid accessing ar from skb->cb when driver is being unregistered.
Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.1.1-00214-QCAHKSWPL_SILICONZ-1 Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3
Referencing memory after it has been freed can cause a program to crash, use unexpected values, or execute code.
Name | Vendor | Start Version | End Version |
---|---|---|---|
Linux_kernel | Linux | 6.10 (including) | 6.11.11 (excluding) |
Linux_kernel | Linux | 6.12 (including) | 6.12.2 (excluding) |
Linux-allwinner-5.19 | Ubuntu | jammy | * |
Linux-allwinner-5.19 | Ubuntu | upstream | * |
Linux-aws-5.0 | Ubuntu | esm-infra/bionic | * |
Linux-aws-5.0 | Ubuntu | upstream | * |
Linux-aws-5.11 | Ubuntu | focal | * |
Linux-aws-5.11 | Ubuntu | upstream | * |
Linux-aws-5.13 | Ubuntu | focal | * |
Linux-aws-5.13 | Ubuntu | upstream | * |
Linux-aws-5.19 | Ubuntu | jammy | * |
Linux-aws-5.19 | Ubuntu | upstream | * |
Linux-aws-5.3 | Ubuntu | esm-infra/bionic | * |
Linux-aws-5.3 | Ubuntu | upstream | * |
Linux-aws-5.8 | Ubuntu | focal | * |
Linux-aws-5.8 | Ubuntu | upstream | * |
Linux-aws-6.2 | Ubuntu | jammy | * |
Linux-aws-6.2 | Ubuntu | upstream | * |
Linux-aws-6.5 | Ubuntu | jammy | * |
Linux-aws-6.5 | Ubuntu | upstream | * |
Linux-azure | Ubuntu | esm-infra/bionic | * |
Linux-azure-5.11 | Ubuntu | focal | * |
Linux-azure-5.11 | Ubuntu | upstream | * |
Linux-azure-5.13 | Ubuntu | focal | * |
Linux-azure-5.13 | Ubuntu | upstream | * |
Linux-azure-5.19 | Ubuntu | jammy | * |
Linux-azure-5.19 | Ubuntu | upstream | * |
Linux-azure-5.3 | Ubuntu | esm-infra/bionic | * |
Linux-azure-5.3 | Ubuntu | upstream | * |
Linux-azure-5.8 | Ubuntu | focal | * |
Linux-azure-5.8 | Ubuntu | upstream | * |
Linux-azure-6.2 | Ubuntu | jammy | * |
Linux-azure-6.2 | Ubuntu | upstream | * |
Linux-azure-6.5 | Ubuntu | jammy | * |
Linux-azure-6.5 | Ubuntu | upstream | * |
Linux-azure-edge | Ubuntu | esm-infra/bionic | * |
Linux-azure-edge | Ubuntu | upstream | * |
Linux-azure-fde | Ubuntu | focal | * |
Linux-azure-fde-5.19 | Ubuntu | jammy | * |
Linux-azure-fde-5.19 | Ubuntu | upstream | * |
Linux-azure-fde-6.2 | Ubuntu | jammy | * |
Linux-azure-fde-6.2 | Ubuntu | upstream | * |
Linux-gcp | Ubuntu | esm-infra/bionic | * |
Linux-gcp-5.11 | Ubuntu | focal | * |
Linux-gcp-5.11 | Ubuntu | upstream | * |
Linux-gcp-5.13 | Ubuntu | focal | * |
Linux-gcp-5.13 | Ubuntu | upstream | * |
Linux-gcp-5.19 | Ubuntu | jammy | * |
Linux-gcp-5.19 | Ubuntu | upstream | * |
Linux-gcp-5.3 | Ubuntu | esm-infra/bionic | * |
Linux-gcp-5.3 | Ubuntu | upstream | * |
Linux-gcp-5.8 | Ubuntu | focal | * |
Linux-gcp-5.8 | Ubuntu | upstream | * |
Linux-gcp-6.2 | Ubuntu | jammy | * |
Linux-gcp-6.2 | Ubuntu | upstream | * |
Linux-gcp-6.5 | Ubuntu | jammy | * |
Linux-gcp-6.5 | Ubuntu | upstream | * |
Linux-gke | Ubuntu | focal | * |
Linux-gke-4.15 | Ubuntu | esm-infra/bionic | * |
Linux-gke-4.15 | Ubuntu | upstream | * |
Linux-gke-5.15 | Ubuntu | focal | * |
Linux-gke-5.15 | Ubuntu | upstream | * |
Linux-gke-5.4 | Ubuntu | esm-infra/bionic | * |
Linux-gke-5.4 | Ubuntu | upstream | * |
Linux-gkeop-5.4 | Ubuntu | esm-infra/bionic | * |
Linux-gkeop-5.4 | Ubuntu | upstream | * |
Linux-hwe | Ubuntu | esm-infra/bionic | * |
Linux-hwe-5.11 | Ubuntu | focal | * |
Linux-hwe-5.11 | Ubuntu | upstream | * |
Linux-hwe-5.13 | Ubuntu | focal | * |
Linux-hwe-5.13 | Ubuntu | upstream | * |
Linux-hwe-5.19 | Ubuntu | jammy | * |
Linux-hwe-5.19 | Ubuntu | upstream | * |
Linux-hwe-5.8 | Ubuntu | focal | * |
Linux-hwe-5.8 | Ubuntu | upstream | * |
Linux-hwe-6.2 | Ubuntu | jammy | * |
Linux-hwe-6.2 | Ubuntu | upstream | * |
Linux-hwe-6.5 | Ubuntu | jammy | * |
Linux-hwe-6.5 | Ubuntu | upstream | * |
Linux-hwe-edge | Ubuntu | esm-infra/bionic | * |
Linux-hwe-edge | Ubuntu | esm-infra/xenial | * |
Linux-hwe-edge | Ubuntu | upstream | * |
Linux-intel-5.13 | Ubuntu | focal | * |
Linux-intel-5.13 | Ubuntu | upstream | * |
Linux-lowlatency-hwe-5.19 | Ubuntu | jammy | * |
Linux-lowlatency-hwe-5.19 | Ubuntu | upstream | * |
Linux-lowlatency-hwe-6.2 | Ubuntu | jammy | * |
Linux-lowlatency-hwe-6.2 | Ubuntu | upstream | * |
Linux-lowlatency-hwe-6.5 | Ubuntu | jammy | * |
Linux-lowlatency-hwe-6.5 | Ubuntu | upstream | * |
Linux-nvidia-6.2 | Ubuntu | jammy | * |
Linux-nvidia-6.2 | Ubuntu | upstream | * |
Linux-nvidia-6.5 | Ubuntu | jammy | * |
Linux-nvidia-6.5 | Ubuntu | upstream | * |
Linux-oem | Ubuntu | esm-infra/bionic | * |
Linux-oem | Ubuntu | upstream | * |
Linux-oem-5.10 | Ubuntu | focal | * |
Linux-oem-5.10 | Ubuntu | upstream | * |
Linux-oem-5.13 | Ubuntu | focal | * |
Linux-oem-5.13 | Ubuntu | upstream | * |
Linux-oem-5.14 | Ubuntu | focal | * |
Linux-oem-5.14 | Ubuntu | upstream | * |
Linux-oem-5.17 | Ubuntu | jammy | * |
Linux-oem-5.17 | Ubuntu | upstream | * |
Linux-oem-5.6 | Ubuntu | focal | * |
Linux-oem-5.6 | Ubuntu | upstream | * |
Linux-oem-6.0 | Ubuntu | jammy | * |
Linux-oem-6.0 | Ubuntu | upstream | * |
Linux-oem-6.1 | Ubuntu | jammy | * |
Linux-oem-6.1 | Ubuntu | upstream | * |
Linux-oem-6.5 | Ubuntu | jammy | * |
Linux-oem-6.5 | Ubuntu | upstream | * |
Linux-oracle-5.0 | Ubuntu | esm-infra/bionic | * |
Linux-oracle-5.0 | Ubuntu | upstream | * |
Linux-oracle-5.11 | Ubuntu | focal | * |
Linux-oracle-5.11 | Ubuntu | upstream | * |
Linux-oracle-5.13 | Ubuntu | focal | * |
Linux-oracle-5.13 | Ubuntu | upstream | * |
Linux-oracle-5.3 | Ubuntu | esm-infra/bionic | * |
Linux-oracle-5.3 | Ubuntu | upstream | * |
Linux-oracle-5.8 | Ubuntu | focal | * |
Linux-oracle-5.8 | Ubuntu | upstream | * |
Linux-oracle-6.5 | Ubuntu | jammy | * |
Linux-oracle-6.5 | Ubuntu | upstream | * |
Linux-raspi2 | Ubuntu | focal | * |
Linux-raspi2 | Ubuntu | upstream | * |
Linux-realtime | Ubuntu | jammy | * |
Linux-riscv | Ubuntu | focal | * |
Linux-riscv | Ubuntu | jammy | * |
Linux-riscv-5.11 | Ubuntu | focal | * |
Linux-riscv-5.11 | Ubuntu | upstream | * |
Linux-riscv-5.19 | Ubuntu | jammy | * |
Linux-riscv-5.19 | Ubuntu | upstream | * |
Linux-riscv-5.8 | Ubuntu | focal | * |
Linux-riscv-5.8 | Ubuntu | upstream | * |
Linux-riscv-6.5 | Ubuntu | jammy | * |
Linux-riscv-6.5 | Ubuntu | upstream | * |
Linux-starfive-5.19 | Ubuntu | jammy | * |
Linux-starfive-5.19 | Ubuntu | upstream | * |
Linux-starfive-6.2 | Ubuntu | jammy | * |
Linux-starfive-6.2 | Ubuntu | upstream | * |
Linux-starfive-6.5 | Ubuntu | jammy | * |
Linux-starfive-6.5 | Ubuntu | upstream | * |
The use of previously-freed memory can have any number of adverse consequences, ranging from the corruption of valid data to the execution of arbitrary code, depending on the instantiation and timing of the flaw. The simplest way data corruption may occur involves the system’s reuse of the freed memory. Use-after-free errors have two common and sometimes overlapping causes:
In this scenario, the memory in question is allocated to another pointer validly at some point after it has been freed. The original pointer to the freed memory is used again and points to somewhere within the new allocation. As the data is changed, it corrupts the validly used memory; this induces undefined behavior in the process. If the newly allocated data happens to hold a class, in C++ for example, various function pointers may be scattered within the heap data. If one of these function pointers is overwritten with an address to valid shellcode, execution of arbitrary code can be achieved.